Ethernet Products

Cable Identifier Combo Pack View full size

Cable Identifier Combo Pack

Cable Identifier with 24pk of LED Lights from Eliminates the need to tone & probe. Eliminate "bleed over" mistakes with tone. Locate the correct port accurately and quickly. Operates on two AA batteries (not included). Part #102440 Note: If you are working on more than 24 ports you can purchase extra LED Lights for Cable Identifier.

Buy this item from Amazon

More details



Cable Supply Products

Cable Identifier Combo Pack 102440

The original Cable Identifier is available exclusively at It is a time saving tool that can cut down time wasted on locating cables on a patch panel. Simply load the patch panel with Cable Identifier LEDs then plug the power supply into keystone jacks throughout a newly installed jobsite. The combo pack comes with 24 LEDs and one power supply; additional LEDs and power supplies are available separately.

  • Eliminate the need to tone & probe
  • Eliminate "bleed over" mistakes with tone
  • Locate the correct port accurately and quickly
  • Save money and time by purchasing this LED lights and Cable Identifier combo together right now
  • Operates on two AA batteries (not included)
  • See the video below for a tutorial


Note: If you are working on more than 24 ports you can purchase extra LED Lights for Cable Identifier.

>> Click Here to purchase extra LED Lights


*Patent Pending

Using a tone generator and probe is a great way to identify cable via a signal relayed on the cable. On one end of a connection a tone generator is plugged into an RJ11 or RJ45 jack, while the tone is being sent across the cable a technician would be on the opposite end and run tone generator probe along a 66 block or put it in each port of the patch panel attempting to locate the tone, depending on how the cable is terminated. After each cable is identified the jack can be labeled according to its location on the patch panel or 66 block. This makes future repairs or changes easier as the cable can be identified from either end of the connection.

Another and more efficient way to identify cables on a patch panel is's new and original product: The Cable Identifier. The Cable Identifier, just like a toner, is plugged into a jack and sends out a signal. Instead of using a toner and checking every port one by one for a tone on the opposite end, where all the cables have already been punched down onto a patch panel, RJ45 mod plugs fitted with LEDs are plugged into every port on the panel. The correlating port on the panel will light up immediately letting the technician know in a second which cable he is toning. The note can be made on a floor plan and then later, once all the cables have been identified, someone can go to each face plate and properly label each location. The Cable Identifier makes identifying and labeling cables so time efficient and easy that even the most novice cabler or technician could easily utilize it on a job site to save time, therefore saving money.


Major Credit Cards Accepted

Loyal Customers

Homeland Security
Walt Disney Imagineering
Time Warner Cable
Qualcomm Technologies
Cox Communications
GAP Inc.
U.S. Olympic Team
Royal Marines, England
NBC Studios
Dallas Police Dept
Huston Police Dept
U.S. Marines
U.S. Army
U.S. Navy
State Government
University of Colorado
Gainesville UMC
Navy Exchange Pearl Harbor
Global PC Net
Eldorado Casino IT Dept
Broadcom Canada Ltd
Sarasota Tax Collector IT Dept
Cypress Networks
Bayside IT Consulting Inc
Aspendora Technologies LLC
Cellular Sales of Kentucky
SDSU Research, San Diego
City of Salem, Mass
Bayside Technology Solutions Inc
SW Technical Investigators
Secure Energy Services, Canada
AAG Management Inc, New York City
U.S. Figure Skating, Colorado
Synergistic Systems Inc
Manatee County Government, FL
Cherokee, Telephone Company, OK
City of Rehoboth BCH, DE
Barnstable Public Schools, MA
Rent-A-Center IT Dept
Super 8 IT Dept
First National Bank
Gruman Corp
City of Oceanside, CA
Hughs Enterprises
Sitemaster Inc
Trans Com Services, LA
Software Builders
ATS Communications Inc
Policy Studies Associates Inc, Wash DC
Ball Aerospace
City of Clyde, OH
NGK Spark Plugs USA Inc
AVAYA Government Solutions
U.N.Y.P.O. LLC New York City
UC Davis
GAP Inc.™ is owned and managed by Networking and IT Professionals. Combined we have over 80 years of experience in the Information Technology field and are excited to share our knowledge with you! We make cabling easier, faster, and more fun.™ is your source for IT and Networking Supplies.

Top Selling Item
CAT6 Ethernet Cable Plenum Jacket Top Selling Item

Weekly Deal: Wall Plates
Wall Plates Available in White or Ivory Weekly Deal

Nova Booted Patch Cords
Multiple colors and styles to choose from Top Seller

Quantity Discounts Available

Browse the mobile site