MiniRaq Open
Go Vertical! - MiniRaQ differs from the traditional wall mount server racks and other rackmount products sold by Chatsworth (CPI), Hoffman, BlackBox, Middle Atlantic, etc. by mounting the rackmount equipment (including servers) vertically instead of horizontally.
The MiniRaq vertical wall mount racks minimize the distance the enclosure is required to extend from the wall. Our vertical wall mount racks enable installation of equipment with depths/lengths as great as 35". Traditional wall mount enclosures limit equipment depths to 19-23".
Ease of Installation - MiniRaQ can be installed by a single technician, this Greatly reduces labor cost of installation. The MiniRaQ vertical rack mount modular design enables tool-less assembly after backplate is secured to wall
MiniRaQ™ OPEN is an open frame wallmount rack.
All OPEN models feature a rugged, low-profile design that is capable of holding 400 lbs. of equipment. As with all MiniRaQ products, equipment is mounted vertically in the OPEN models significantly reducing the wall space & clearances required to install the rack. All OPEN models feature 2U of dedicated space for patch panel hardware.
OPEN models are available with 4U, 6U, 8U or 10U side panels when selected.
- Data Rack Open Vertical - 4U + 2U (our part#101488) Standard MiniRaQ MRQ100V06 6U MiniRaQ Standard includes a 2.5 deep backplate and (2) 4U side panels. The upper section of the backplate features a 2U space dedicated for installation of up to 48 ports of patch panel hardware. The 4U side panels are capable of holding over 400 lbs. of equipment mounted in a vertical orientation. This open rack extends only 9.8 from the wall and can accommodate rackmount equipment with any depth/length. Two circular holes on the top of the backplate can be used for data cable routing, power cable routing or conduit routing. An integrated level and grounding lug assures that a single technician can quickly & accurately install the MiniRaQ and properly ground all installed equipment
- Data Rack - Open Vertical - 6U + 2U (our part# 101489) Standard MiniRaQ MRQ100V08 8U MiniRaQ Standard includes a 2.5 deep backplate and (2) 6U side panels. The upper section of the backplate features a 2U space dedicated for installation of up to 48 ports of patch panel hardware. The 6U side panels are capable of holding over 400 lbs. of equipment mounted in a vertical orientation. This open rack extends only 13.3 from the wall and can accommodate rackmount equipment with any depth/length. Two circular holes on the top of the backplate can be used for data cable routing, power cable routing or conduit routing. An integrated level and grounding lug assures that a single technician can quickly & accurately install the MiniRaQ and properly ground all installed equipment.
- Data Rack - Open Vertical - 8U + 2U (our part# 101490) Standard MiniRaQ MRQ100V10 10U MiniRaQ Standard includes a 2.5 deep backplate and (2) 8U side panels. The upper section of the backplate features a 2U space dedicated for installation of up to 48 ports of patch panel hardware. The 8U side panels are capable of holding over 400 lbs. of equipment mounted in a vertical orientation. This open rack extends only 16.8 from the wall and can accommodate rackmount equipment with any depth/length. Two circular holes on the top of the backplate can be used for data cable routing, power cable routing or conduit routing. An integrated level and grounding lug assures that a single technician can quickly & accurately install the MiniRaQ and properly ground all installed equipment.
- Data Rack - Open Vertical - 10U + 2U (our part# 101491) Standard MiniRaQ MRQ100V12 12U MiniRaQ Standard includes a 2.5 deep backplate and (2) 10U side panels. The upper section of the backplate features a 2U space dedicated for installation of up to 48 ports of patch panel hardware. The 10U side panels are capable of holding over 400 lbs. of equipment mounted in a vertical orientation. This open rack extends only 20.3 from the wall and can accommodate rackmount equipment with any depth/length. Two circular holes on the top of the backplate can be used for data cable routing, power cable routing or conduit routing. An integrated level and grounding lug assures that a single technician can quickly & accurately install the MiniRaQ and properly ground all installed equipment.
More Info:
This vertical data rack mounts to a wall and you can store your equipment in a vertical configuration, saving you much more space than a traditional rack. The Open style includes a 2.5 deep backplate and 2 side panels. The bottom is left open so it can accommodate equipment without any length/depth restrictions. The upper section of the backplate features a 2U space dedicated for installation of up to 48 ports of patch panel hardware. The side panels are capable of holding over 400 lbs. of equipment mounted in a vertical orientation. Two circular holes on the top of the backplate can be used for data cable routing, power cable routing or conduit routing. An integrated level and grounding lug assures that a single technician can quickly and accurately install the rack and properly ground all installed equipment.
Open configuration with 2.5 deep backplate and 2 side panels Rack unit space for vertically mounted equipment: 4U, 6U, 8U, or 10U Dedicated patch panel space at top of backplate: 2U 19.25 high, 19 wide Model depths: 9.75 (4U model), 13.25 (6U model), 16.75 (8U model), 20.25 (10U model) Made in the USA Revolutionary space saving design! Equipment is installed vertically to allow placement in small, previously unusable spaces Optimized for today's deep rackmount components Designed to hold up to 400 lbs. of equipment without additional bracing. Rapidly mounts to wall studs, backboard or concrete block. Installation is easily performed by a single technician. Integrated bridge lances for easy and efficient cable management. Large cable access holes on top, bottom & sides of backplate. Integrated earth grounding stud. Constructed from heavy duty 14AWG steel.
